Address：Nantong City, Jiangsu Province, Rugao East Chen Xiaokang Road 35
How does the reactor defend the static electricity?
How does the reactor defend the static electricity? High pressure hydrolysate tower, reaction kettle manufacturer expresses:
1.avoid mixing of water and reaction kettle, avoid co transportation of different media, avoid liquid media, oil and gas and compressed air co transportation, and store tanks even if dehydration. Special attention should be paid to dehydration before feeding.
2.cross connection. The floating roof of a floating roof tank should be connected to the wall of the tank. Pipelines and valves, flowmeters, filters, pumps, tanks are used for insulation or corrosion.
3.Earthing. The storage tank and the soliton should be grounded to prevent mine grounding.
4.Control medium injection mode. The medium should be injected into the bottom of the tank to avoid injecting medium from the top of the tank as far as possible. If the medium is inject from the top of the tank, the depth of the outlet of the pipe should be 200mm at the bottom of the tank.
5.control the flow velocity of the medium. The larger the flow rate, the more easy to generate electricity. The safe flow rate of the reactor oil in the pipe is v=0.8 (1/d) 1/2 (D is the diameter of the pipe, and the V represents the average velocity).
6.inert protection gas. In the tank, nitrogen protection is added to reduce the nitrogen content in the tank. No explosive mixture can be formed on the oil surface of the tank, even if the electrostatic discharge spark is generated in the tank, it can also ensure the safety of the tank.
7.adding antistatic additives. The addition of antistatic additives greatly increases the conductivity of the medium, makes the static charge inside the dielectric not accumulate, and quickly leaks through the earth to ground.
8.Install the electrostatic eliminator. The electrostatic eliminator is installed at the end of the pipeline, and the charge is injected into the phase pipe with the opposite charge of the charge in the oil, so as to neutralize the charge and eliminate the static electricity.
9.install the electrostatic mitigate. After the reactor is in the filter, the fluid enters the front of the tank to install the electrostatic mitigate.
10.The reaction kettle controls the generation of the body's static electricity and the elimination of the static electricity of the human body. The personnel of the upper tank (sampling, measuring, etc.) must first touch the electrostatic device of the human body. Wear antistatic clothes.