Address：Nantong City, Jiangsu Province, Rugao East Chen Xiaokang Road 35
What is the structure of the reactor
What is the structure of the reactor? The shell type heat exchanger manufacturer expresses:
The reaction kettle consists of the kettle body, the cauldron cover, the jacket, the agitator, the transmission device, the shaft sealing device and the support, etc. When the height of the mixing device is large, the multi layer impeller can be used, and it can also be selected according to the requirements of the user. The clamp sleeve is set outside the wall of the kettle, or the heat exchange surface is set in the device, and the heat transfer can also be carried out through the external circulation. Support seat has support type or ear type support. Gear reducer should be used more than 160 rotating speed. The number, specification or other requirements of opening can be designed and made according to the requirements of the user.
1. usually in normal pressure or low pressure conditions of packing seal, the general use of pressure less than 2 kilograms.
2. in general medium pressure or vacuum condition, mechanical seal will be adopted, and the general pressure is negative pressure or 4 kilograms.
3. under high pressure or high volatile medium, the magnetic seal will be used, the general pressure is more than 14 kilograms. In addition to the use of water cooling for magnetic seals, other sealing forms will increase the cooling water jacket over more than 120 degrees.